Tuesday, January 6, 2015

Lenovo S650, How to Root Vibe UI 2.0 China version Firmware 1439

Lenovo S650, How to Root Vibe UI 2.0 China version Firmware 1439 - After yesterday write a guide about how to install TWRP on Lenovo S650 running Vibe UI 2.0, now i will write a guide how to root it. With rooting your device, you now free to modified your device, change the user interface, modified system files, install custom ROM, backup / restore your current running ROM and etc.
But rooting also have disadvantage and for sure your warranty will be void, with rooting you can also accidentally erase or move system files that make your device brick, so please be sure to consider it first before following this guide.
Now let start the guide and please do it with careful especially when you installing custom recovery, because it can brick your device.

Disclaimer :
This guide for educational purpose only, We not responsible if your device bricked after following this tutorial. (DWYOR)

Lenovo S650, How to Root Vibe UI 2.0 China version Firmware 1439

Requirements :

Download :
  • 4.4Root this is a root applications and binary Su that will install on your system
Lenovo S650, How to Root Vibe UI 2.0 China version Firmware 1439
  1. Make sure you have install custom recovery TWRP or CWM and can run it with propely.
  2. Copy or move 4.4Root to your external SD card, don't place it inside the folder place it outside the folder.
  3. Now turn off your device, wait until completely turn off. While in off condition press and hold Power Button + Volume Up + Volume Down button release when you can see TWRP or CWM main menu.
    Lenovo S650, How to Root Vibe UI 2.0 China version Firmware 1439 Lenovo S650, How to Root Vibe UI 2.0 China version Firmware 1439
    CWM TWRP
  4. On custom recovery main menu select Install ↦ Select zip to install point to external SD Card where you store 4.4Root and select it. 
    Lenovo S650, How to Root Vibe UI 2.0 China version Firmware 1439

  5. Swipe to install, installation will start and will take just for 5-10 second. just confirm every question that show with Yes button. 
  6. Finish, reboot your device. Let Android do system update and check on your home screen to see that application KingUser already install on your system. Confirm with RootChecker applications download from google play store.
Congratulation, you have successful root your devices, now you can freely modified your device to meet your needs. Next i will write a guide how to partition internal memory on Lenovo S650 running Vibe UI 2.0. Just leave comments if you found any broken link or problems regarding this guide. Thank You

Share on Facebook
Share on Twitter
Share on Google+
Tags :

Related : Lenovo S650, How to Root Vibe UI 2.0 China version Firmware 1439

14 comments:

  1. Great work admin. Thanks.
    Now I can uninstall the Chinese apps using KingRoot app.

    ReplyDelete
    Replies
    1. Hi,
      Great job to you also. And thank you for leaving positive comment

      Delete
    2. Should busy box be installed if I am going to install gapps?
      Could you recommend me a gapps package suitable with this model?

      Delete
    3. It ok if you want install busybox, busybox contains root commands and it ok if you install it. Just search at google gapps package that suitable for your operating system. Recommended that you use minimal package.

      Delete
  2. The SU binary is not installed, so no root permission.
    How to solve this?
    Thank you.

    ReplyDelete
    Replies
    1. su binary on the 4.4Root.zip, you must install it from recovery.follow the ink on the requirement section to install custom recovery then back to this guide to install 4.4root.zip that contains Su binary.

      Delete
  3. Dear admin,
    The kingroot has been installed, but the su binary is not installed.
    So I need to reinstall it again via recovery, right?
    Thanks.

    ReplyDelete
    Replies
    1. yes, install it again with recovery, use custom recovery. it will not work using standard recovery so please install TWRP or CWM first

      Delete
  4. I really want to install CWM help me please to have it on VIBE UI 2.0,TWRP give too much failure while restoring..

    ReplyDelete
    Replies
    1. Cwm is rare for lenovo devices only available for certain device and i think Lenovo S650 dont have it

      Delete
  5. Hi Andy, this 4.4 root have Google application ?

    ReplyDelete
    Replies
    1. No it only root program, for install gapps on vibe ui 2.0 you should install custom recovery and the install gapps from it. Please ask one by one.. Thank you

      Delete
    2. not always TWRP. CWM is also custom recovery Carliv Touch is also custom recovery. depend what you install on your device but all custom recovery have same functions

      Delete