Friday, September 25, 2015

How to Fixing Lenovo S850 no Service Issued, 100% Work

How to Fixing Lenovo S850 no Service Issued, 100% Work - Got this posting from the comments one of blog reader, a lot people got this problems when modified Lenovo S850. Beside Lenovo S850 when you got invalid IMEI and no service issued on your device, you can fix it by restore the IMEI and it will fix the problems other then Lenovo S850.
I don't know this guide can be use for other china device or just Lenovo S850 so if you try to another please give some word on comment.
No service is cause by NV file corrupt, so using flash tool we gone read back NV file and the flash it back to our device, if you do right this procedure than it will revive your device from dead. Please read careful step by step because it think it will complicated.

Disclaimer :
This guide for educational purpose only, We not responsible if your device bricked after following this tutorial. (DWYOR)

How to Fixing Lenovo S850 no Service Issued, 100% Work

Download
  • SP Flash Tool v3.1320 for this guide actually you only need the flash tool, you can use any version of flash tool but recommended to use v3 flash tool.
  • S850_ROW_S215_150114 ↦ 1.1 Gb, because this guide is for Lenovo S850 then you need to download Lenovo S850 stock ROM, for another china device then you need to search it on the need.
  • NV_RAM Lenovo S850 NVRAM block, cannot be use for another device.
How to Fixing Lenovo S850 no Service Issued, 100% Work
  1. Download all files and place on the same folder, so you can easy to search the needed files. Extract the both files too and then go to flash tool extracted folder, run flash_tool.exe for windows 7 or later please use administrator privilege 
  2. After you can see the flash tool windows, now press ALT + CTRL + V. This will make flash tool run on Advanced Mode, you can see on the flash tool windows bar. On the Download tab  click Scatter-Loading button and the navigate to ROM extracted then select MT6582_Android_scatter.txt this will load all ROM files to flash tool.
  3. Click Windows ↦ Write Memory this will add a tab, then select the Write Memory tab, like on the below picture
    How to Fixing Lenovo S850 no Service Issued, 100% Work

  4. Open scatter file that you find on the extracted ROM, using word pad or notepad. Search for NV word, you will see three address on the scatter file linear_start_addr, physical_start_addr and partition_size. Put the linear_start_add on the Begin Address (Hex) and partition_size on the Container Length (Hex)
    How to Fixing Lenovo S850 no Service Issued, 100% Work

  5. Click on Open RAW Data, select the NV_RAM file that already downloaded
    How to Fixing Lenovo S850 no Service Issued, 100% Work

  6. Last click Write Memory button, turn off your device because Lenovo S850 using non removable battery you must make sure that your device is completely turn off, connect your device to flash tool using USB cable and flash tool will recognize your device and begin to start flashing process, wait until you can see GREEN CIRCLE in the middle of flash tool.
  7. Done, disconnect then try to turn on your device and normal boot. See if the service already on and can be use on your device.
Done, Congratulations i hope your Lenovo S850 already fix and can be use to make call and receive messages again. Please leave comments if you found any problem or broken link regarding this guide 

Share on Facebook
Share on Twitter
Share on Google+
Tags :

Related : How to Fixing Lenovo S850 no Service Issued, 100% Work

170 comments:

  1. You must check emmc write not flash! Its important..

    ReplyDelete
    Replies
    1. Thank you for your information i will update soon

      Delete
    2. I tried to flash it but still S217, Is its safe if I check nand flash instead of emmc?

      Delete
    3. you should select emmc, if you wanna fix the signal problem.
      I dont understand what you mean with "I tried to flash it but still S217"

      Delete
    4. @andy suwito why don't you just put the "check the emmc write" thing as @ogi beng mentioned into your wtiting above ? i followed your instructions perfectly but my phone getting bricked right after i write the nv, dunno why but after read @ogi beng's then everythings getting clear ... i checked the "nand flash" insted of emmc (yea since you don't mentioned it earlier @andy suwito).
      so .. be more cautious on your writing @andy suwito

      Delete
    5. I am already write it alot on comments reply, never have chang to edit the guide because the device already sold, so cannot get the screen capture

      Delete
  2. The build number, I successfully flashed it but the build number is still the same before I flashed this fix. Should it be S850_ROW_S215_150114 already?

    ReplyDelete
    Replies
    1. no, it not flash the ROM S215,
      when you have S217 then it ok use S217, the ROM need because you cannot use this method and flash NV_RAM if you don't have the full stock step 2.
      if will only flash of recreate NV_RAM on your device base on S215 MT6582_Android_scatter.txt

      Delete
    2. Ahh, ok so therefore I successfully flash my phone to recreate the NV_RAM base on S215. So this is solve already sir?

      Delete
  3. Is your signal is already restore?
    What you follow this guide on the first time? Is you have signal issue or you just wanna update your device?

    ReplyDelete
    Replies
    1. I just want to try this fix because on our home location, my S850 phone can only get Edge signal since I updated my phone into S217. Hopefully If i get back there later, I can get H+ signal.

      Delete
    2. this not for that problem, this for Lenovo S850 that have no signal at all. Sometime when we flash new ROM nvram partition that store IMEI delete too, so need to recreate again with above method.
      if you have signal problem that try this http://bit.ly/1aKQpXq

      Delete
  4. Replies
    1. Already check the link, all link redirect with bit.ly and adf.ly so please change dns to google if cannot download. All work fine already try

      Delete
  5. I want to ask somethink I'm with build number: S850_ROW_217_150420 and I have network(signal issue) ..Do I have to download S850_ROW_S215_150114 - or I can fix it without downloading it ? (Sorry for my english)

    ReplyDelete
    Replies
    1. this guide need source, so if you now running S217 then you need have the source of S217. But if you dont have then need reflash to S215 then download the source to use for this guide.

      Delete
    2. Hi again ..I did everything but when i finally click "write memory" it gives me an error and tells me that 0x180000 is not a valide integer value ?

      Delete
    3. the 0x180000 is different for every scatter file, look at your own scatter file.
      "Open scatter file that you find on the extracted ROM, using word pad or notepad. Search for NV word, you will see three address on the scatter file linear_start_addr, physical_start_addr and partition_size. Put the linear_start_add on the Begin Address (Hex) and partition_size on the Container Length (Hex)"

      Delete
    4. Okay ..I found it ..I last click write memory and it freezes ..I mean nothing happen.. it stays at 0% and ..nothing ..

      Delete
    5. when it still 0% and not moving then you must check your USB VCOM driver,
      " Install this driver first on your computer, Turn off your device and remove the battery, using USB cable connect your device while look at My Computer ↦ Manage ↦ Device Manager there will be MTK65xx Preloader Devices show up for 5 second than disappeared, before disappeared right click on it and select Update Driver Software point it to USB VCOM Driver extracted folder. When it finish disconnect and connect again there will be Mediatek PreLoader USB VCOM Port on your device manager."
      look at this guide to install it http://bit.ly/1moCD1m

      Delete
    6. if your battery non removable then just make sure your device is completely turn off.

      Delete
    7. man thanks it doesnt worked but thanks ..i don't want to waste your time anymore..i'll try it again later and see what happens ..thank u so much for this post .. \\// peace

      Delete
    8. sorry, you cannot download because the 4shared.com close my public sharing. but now it open again.
      Ok just leave message if you got problems

      Delete
    9. man i removed my battery I did everything again ..but nothing .. I didn't download the USB VCOM driver..cause as I said ..I removed my battery ..but it just doesn't want to do it ..it stays at 0% and doesn't move

      Delete
    10. I dont understand with your think. How can the computer recognize your device if you dont install the usb vcom driver?
      When lenovo device is turn off and connect to computer it become mediatek vcom port and it need driver so computer will recognize it. When you not install usb vcom driver the progress will always 0% and computer will not respond when you connect your device

      Delete
    11. using USB cable connect your device while look at My Computer ↦ Manage ↦ Device Manager there will be MTK65xx Preloader Devices show up for 5 second than disappeared, ..man I can''t find this thing

      Delete
    12. look at this video and follow https://goo.gl/f9jpwc

      Delete
    13. man in the link that u gave me ..when I download the usb vcom ..and after I extracted it there is no exe file to install it ..can u give another link

      Delete
    14. look at video description, there is a bunch of links that you can download. use that link to install the usb vcom and follow the video.

      Delete
    15. it gives me some type of error ..i give up i cant do it :D

      Delete
    16. ok, thank you for visit the blog

      Delete
    17. well regarding that problem i have the same as @KyPaMuqHko
      where it wont turn on eventhough it charge or try to reflash
      the solution i can is to let the phone wont be use for several hour(depend on how many percent left before u start to write memory) and the recharge it, from there it will recharge from 0% then try to full reflash it and viola it still on but the network problem still there

      the next problem is when i tried to write it again the address change suddenly after click the write button from 0x1800000 to 0x0000001800000, no solution for this one

      any workaround for this andy?

      Delete
    18. the point from this guide is to make NVRAM partition again,
      and that can be done with scatter file that point on 0x1800000 and 0x500000 on the memory. but this depend on the scatter file

      Delete
    19. 1.already done that, writing the nvram, the red bar progress going then it no red bar bar but the progress keep going no nothing like the green circle and my s850 fail to turn on(like hard brick) again, but no worries i got its battery 15% left, gonna let its dried up and tries to do this process with new version of flashtool

      2.flash tool saying failed to open raw data that is NVRAM..
      im gonna check with latest spflash tool

      thnx for replied andy,will be back soon

      Delete
    20. I will waiting for the progress, just leave messege if you got any problems

      Delete
    21. https://www.youtube.com/watch?v=x-1yyBgC6Bo

      How to solve invalid imei and no service on lenovo s850

      Delete
  6. Replies
    1. already check and it alive, it can be download

      Delete
    2. Hi, my phone no serial number after flashing vibeui via spflash tools , imei fix done, and the telco name appear, but still no signal. is this tutorial will fix it? and should i use that red number in the tutorial or use no in scatter file? thx for feedback

      Delete
    3. I hope it will fix it. But you must try first if you want to know right, nothing to lose.
      Use no on your own scatter file, on the guide it just example

      Delete
  7. Replies
    1. You welcome, thank for visit and leave comment

      Delete
  8. thanks gan,, its work.. god bless u

    ReplyDelete
    Replies
    1. Nice to heard that this guide can help you, thank gor visit and leave comment

      Delete
  9. gan nv_ram link error (Sorry, the file link that you requested is not valid. Sign error.), please reupload/mirror..

    thx for help..

    ReplyDelete
    Replies
    1. I am already try the link and it work fine. It upload on my 4shared so, if i am not deleted it, rhe file will still on there

      Delete
  10. Their are such a types of Method mode...
    Some, Are Easy, Medium, Tough ..
    Just Learn it,Let's do it ... always try without compromising... try & error

    ReplyDelete
    Replies
    1. thank you for visit and leave comments, really appreciate it.

      Delete
  11. Replies
    1. I am already try the link and it work fine. It upload on my 4shared so, if i am not deleted it, rhe file will still on there

      Delete
  12. hi andy im back sorry for very long reply yes i did fix but ur method is actually check emmc if not check i get into hardbrick (solution for hardbrick refer to my other early)
    with this fix i have the signal but very very weak

    ReplyDelete
    Replies
    1. yes maybe it need to check the emmc option. thank you for your correction.
      for signal problem i think you should change the modem file, maybe the modem file is not fit with your country provider, and above guide is just to bring back the NVRAM partition

      Delete
  13. please i dont speak english, my phone s850 he seguido los pasos de su pagina pero me sale error la direccion de 0x1800000 invalida y no deja otra de todas las que hay en NV_RAM. THANKS.(my phone no signal..)please.please

    Hefaca

    ReplyDelete
    Replies
    1. So sorry i dont understand what your mean i, only know english. So sorry

      Delete
  14. andy what cause brom error Enable DRAM failed!.
    after flashing my lenovo got brick

    ReplyDelete
    Replies
    1. give error code or error number,
      more description about brick. cannot turn on or still can boot but stuck on lenovo logo or can turn on with red light or etc
      describe more

      Delete
  15. wont turn on and cant go to recovery mode. press on button nothing happen.
    yesterday before flashing it works properly..

    BROM ERROR:S_FT_ENABLE_DRAM FAIL (4032)
    [EMI] enable DRAM FAILED.

    ReplyDelete
    Replies
    1. BROM ERROR:S_FT_ENABLE_DRAM FAIL (4032)
      [EMI] enable DRAM FAILED.
      this error mean your device need special preloader because your device produce in 2014 so it need special preloader.
      look at this http://www.saransaro.com/how-to-guides/brom-error-fix/

      Delete
    2. can you share any possible rom to fix this problem. lenovo a680.thanks

      Delete
    3. sorry i cannot, i dont have guide for Lenovo A680

      Delete
  16. it worked on the 1st go of trying... it seems complicated but all u have to do is just use some common sense ...

    also on Memory Setting u must select EMMC, not Nand Flash (not like what is shown on the picture)...

    if everything done accordingly, once u connect ur S850 (during power off state) SP F tool flashes instantly like in 2 seconds u get green circle ....

    ReplyDelete
    Replies
    1. thank you for your correction and your comment, about the picture yes you right i will as soon as possible to change the picture.
      thank you

      Delete
  17. adf.ly download sites not working. either plz provide any other links or check again. in india adf.ly sites are blocked

    ReplyDelete
    Replies
    1. some country block adfly service so you must change the dns to google dns to be able to download it.
      sorry it because your country provider block it.

      Delete
  18. Can you mail the NVRAM file to rohithchalattil@gmail.com plz

    ReplyDelete
    Replies
    1. All the link on this blog redirect using adfly, it maybe your provider blog it so change your dns to google to download it

      Delete
  19. what about S820? I fixed the imei but my device still show no service

    ReplyDelete
    Replies
    1. S820 dont need this, once you restore the imei signal or service will restore too. On yours maybe check there is an error on baseband or SN or something

      Delete
  20. NV_RAM Link eror , report link new please

    ReplyDelete
    Replies
    1. That not error, it because your country block adfly service so change your dns to be able to download it

      Delete
  21. Just to make sure do i need a root on s850 i got my friends phone he complains about signal lost on s217 and do i have to do something specific on win 8.1
    thanks great blog

    ReplyDelete
    Replies
    1. No need to root it but make sure emmc is selected than nand flash, but it not recommended if you using win 8. Recommended using win xp and windows 7

      Delete
  22. Thanks a lot in advance i'll post to tell how it goes theese days

    ReplyDelete
    Replies
    1. Your welcome, thank for visit and leave comments

      Delete
  23. Ok i did everything on the phone using scater file from internet i found from s217 hex 0x14800000and part size 0x80000 and the nv file from post and get green circle and everything and now the phone is dead what should i do it is stuck on lenovo screen and not booting should i use hex 0x180000... and 0x500000 or ill make it worse

    ReplyDelete
    Replies
    1. are you already flash the ROM i include on the download section which is S215? there is scatter file for S215 on the download section inside the downloaded ROM and why you are using S217?
      redo it but flash your phone with S215 then fix the NVRAM. On step 3 dont forget select emmc rather than NandFlash. (important)

      Delete
    2. This comment has been removed by the author.

      Delete
    3. Tool DL image fail is because you not check DA DL checksum when flashing the ROM it on the upper right on flash tool v3 or on option in the flash tool v5

      Delete
  24. Dear Sir...firstly Thanx a lot bcz when first time my lenovo stuck when i update my phone. that time i was follow ur post any its really works for me like charm. but now i have a problem unfortunately i format my phone when i update Lollipop. i repair IMEI number but i Felt to write s/n its show me 0000000 like this...so my network is not working...Wifi,Hotsport,Camera all are working gud only when i connect wifi its show me NV Ram error but its working...m using Row version 207...PLzzzz Help sir.

    ReplyDelete
    Replies
    1. for your problem, look at this guide http://forum.xda-developers.com/showthread.php?t=2730486

      Delete
  25. But it doesnt work for me the signal is very poor only 1 i used an older version s119 and there the signal is full can you give a link how to repair emai becuse i format it thanks

    ReplyDelete
    Replies
    1. the objection on this guide is fix the no service, so install the ROM so the objection can be achieved, after achieved you free to change the ROM. do you get the point ? dont bother about signal, bad UI or other.

      Delete
  26. After this step do in my mobile my Lenovo s850 show invalid imei plz help

    ReplyDelete
    Replies
    1. follow this guide http://bit.ly/1teLvmQ

      Delete
  27. Replies
    1. have you select emmc on picture 3? it not Nand Flash like above, it wrong. select Emmc and the continued to next step

      Delete
  28. Pls send me Lenovo s850 nvram file link above link not work

    ReplyDelete
    Replies
    1. it working just fine, your country block adfly service so if you want to download it change your DNS to google DNS.

      Delete
  29. wtf Lenovo S850 is MTK6592 You did Wrong Rom and bricked my phone how to unbricked it??

    ReplyDelete
    Replies
    1. Your S850 os fake, look at gsm arena about S850 http://m.gsmarena.com/lenovo_s850-6158.php. And one again i will not help you fix it.

      Delete
  30. click on EMMC
    Open scatter file that you find on the extracted ROM, using word pad or notepad. Search for NVRAM, you will see three address on the scatter file linear_start_addr, physical_start_addr and partition_size. Put the linear_start_add on the Begin Address (Hex) and partition_size on the Container Length (Hex).
    100% working

    ReplyDelete
    Replies
    1. thank you for your information, and thank you for your correction

      Delete
  31. Lots of files in S850_ROW_S215_150114 even I see flashtool there
    S850_ROW_Flash_Tool_v3.1324.0.177_PreloadUpdate

    ReplyDelete
  32. hi. can help me.
    my s850 now currently rom version s216. can i downgrade 1st to s215 firmware then fix this error? im scare when downgrade it will hardbrick my device. help. i need get rid this no signal problem

    ReplyDelete
    Replies
    1. If you scare then dont the downgrade just bring your lenovo to service center, because this guide it has possibility to brick your device so consider it

      Delete
  33. he can I use your post on my page ..

    do you want to partnership with me on my page if you like.
    we work together like brothers

    ReplyDelete
    Replies
    1. yes you can use it in your post but please give backlink to this post also.

      Delete
  34. did this and my phone is dead now...helppp

    ReplyDelete
    Replies
    1. have you select emmc on picture 3? it not Nand Flash like above, it wrong. select Emmc and the continued to next step

      Delete
    2. do we need to use the exact same rom given above? or i can use the one i already have?

      Delete
    3. better you use the given ROM above. because the address is came with the ROM.

      Delete
  35. Just asking Your post can fix the problem of invalid inei on my s850 device?

    ReplyDelete
    Replies
    1. follow above post first, but please select EMMC on step 3 then after you got your signal back then follow this guide to fix the IMEI http://bit.ly/1teLvmQ

      Delete
    2. how about the serial number cuz its (sn:00000000) how can i fix that thanks

      Delete
    3. i never lost my serial number so i dont have guide about it and dont know how to fix the serial, so sorry cannot help you more

      Delete
  36. why its still no service

    please help thanks

    ReplyDelete
    Replies
    1. The step is, create nvram partition using above guide then fix the imei using the link i give you then restart your device sim will be recognize and signal will restore

      Delete
    2. i think its because i used row s211 on it isn't it? or it doesn't mattter if i used those?

      Delete
    3. better use row that prepare above because the address on the nvram is base on firmware above not base on S211 like yours

      Delete
    4. Frenielle Mendoza, had you fixed the SN problem? Mine had it too. SN:00000000.
      Any suggestion Andy?

      Delete
    5. try following this guide http://www.needrom.com/download/restore-fix-lost-imei-and-serial-numbers-for-all-mtk/

      Delete
  37. can you sajact to me which one is comfotable wcdma for lenovos850 pls help to me bro

    ReplyDelete
    Replies
    1. What can i suggest to you? Above guide is too restore missing nvram partition on Lenovo S850

      Delete
  38. Hi andy ive come back to this blog and gladly to report to all of you that i got my lenovo s850 repair by my own with andy method.
    actually all the method suggested by andy is working like the flash nvram stuff.
    now i have full signal. after inspecting internally hardware actually the black antenna wire was crushed by the internal component so, i arrange back the black antenna wire and viola the signal is back. my theory is long before i got my screen replacement and maybe during that time the tech guys didnt notice the antena wire placement thus leading to no signal....
    so i place the black antenna wire back to its original place


    but hear my warning, i disassemble my lenovo s850 with my own hand and placed the black antena wire with no what so ever skill and understand the risk that will happen.

    ReplyDelete
    Replies
    1. Thank you for your comments and your information, i hope everyone can be helped with your comments

      Delete
  39. NV file work 100%,only nv file flash with miracal box its work auto imei back with network.thanks.

    ReplyDelete
  40. its works for my phone signal thanks andy :thumbup
    but my SN:00000000
    overall everything working fine, what the effect if SN:00000000 for s850?

    ReplyDelete
    Replies
    1. It should not give any effect but if you bother then try write SN using Maui meta in this guide http://bit.ly/1teLvmQ

      Delete
  41. Thanks Andy for solution , i will try it today , just want to confirm that it will work fine with my lenovo S850 with below info , can you please advise :
    Baseband version : S850.V106
    Build number : VIBEUI_V1.5_1419_2_ST_S850
    with no serial or IMEI

    ReplyDelete
    Replies
    1. before try please read all the comments above you will know what to do next, on step 3 choose EMMC instead Nand Flash not change it yet.

      Delete
  42. Hello,Andy I flash my lenovo s850 before reading commets by selecting NAN FLASH.Now my phone looks like hard brick.I can't turn on my s850.Only black screen appears. How to solve it.Plz helps thank.

    ReplyDelete
    Replies
    1. no need to turn on the phone, as long as your phone know by the flash tool then you can still redo the process.

      Delete
  43. Thanks Andy for the procedures , i followed the steps and my phone got IMEI but it's different than the original IMEI , and still no serial , when tried the phone slot1 still didn't detect any signal , only slot2 detects not-3g signal for calls only . Can you please support me in this .

    ReplyDelete
    Replies
    1. try change the modem , this procedure only make your phone got signals, try this try following this guide http://www.needrom.com/download/restore-fix-lost-imei-and-serial-numbers-for-all-mtk/

      Delete
    2. Thx andy , but this procedure is not working :(

      Delete
    3. Try again but read the other comments above, and on the step 2 choose emmc rather than nand flash

      Delete
  44. Hi, I download the rom S217 from your website and now I am having issues:
    1. In wifi, NVRAM warning is getting displayed.
    2. Imei number is invalid.
    3. I am getting no service all the time.
    Now, Hopefully I resolved the first 2 issues but I am not ahle to resolve the 3rd one (no service). I looked into the S217 rom for nvram file and flashed it as per the steps given above, but still no signal. Even I downloaded your nvram file and flashed, still no signal. Please help. I am on version S217.

    ReplyDelete
    Replies
    1. Dont forget on step 3 choose emmc instead nand flash, i am wrong at step 3, if you look at prev comments you will get signal after complete this guide

      Delete
  45. black screen after flash .. need help please

    ReplyDelete
    Replies
    1. Reflash your device with old stock ROM version

      Delete
    2. CN Firmware 70 and S211 not flash
      need s210 please

      Delete
    3. Have this on the blog http://bit.ly/1wmEwRE, you can follow for install on your device

      Delete
    4. i connect device to computer but flash tool not recognize the device
      flash tool searching all time
      help me please

      Delete
    5. Install the driver again, recommended using windows xp or windows 7

      Delete
  46. i dont understand... shoud we change 0x0000000 to 0x1800000 or 0x1800000 to 0x0000000 ?

    ReplyDelete
    Replies
    1. The first one 000 to 180. But on step 3 choose emmc rather than nand flash

      Delete
  47. Ty so much andy for this wonderful post and fellow bloggers. Tried it on for S208 ROW. Works perfect.

    ReplyDelete
    Replies
    1. Thank for your comment too, hope everyone can see your comment

      Delete
  48. must be the Internet connection? thnks for answer.

    ReplyDelete
    Replies
    1. sorry dont understand.. repeat the problem please

      Delete
  49. I had the same problem after i Reset my Lenovo S850 i was getting Invalid IMEI and SN number....... I did as it mentioned above but still my SN number and IMEI Number is displaying as Invalid So what should i so .

    ReplyDelete
    Replies
    1. above guide is not for restoring IMEI, above guide is for fixing lost signal on Lenovo S850. fo restoring IMEI follow this guide http://bit.ly/1teLvmQ

      Delete
  50. Hello can you help help me with me with my lenovo a269i not getting a signal after I flash stock rom..

    ReplyDelete
    Replies
    1. Try check your imei*#06# and if it show invalid l, fix it using MAUI 3 you can follow this guide http://bit.ly/1teLvmQ

      Delete
  51. after i follow intruction from nvram problem....my phone directly cannot open and i press button power and volume...nothing happen...can you solve my problem

    ReplyDelete
    Replies
    1. On step 3 choose emmc not nandflash, repeat the above step and correct step number 3 with choose emmc

      Delete
  52. NEED FILE FOR S850..PLEASE HELP

    ReplyDelete
    Replies
    1. What file? All files on above guide

      Delete
    2. I FLASHED S850_ROW_S215_150114,
      BUT NOW, BUT NOW "NO NETWORK".
      HELP

      Delete
    3. Follow above guide but on step 3 choose emmc rather that nand flash. Wrong image.

      Delete
  53. Brother download links are dead please update.

    ReplyDelete
    Replies
    1. Hi, that not dead, all my links redirect using adfly so if you cannot download just changge your dns to google some country block adfly

      Delete
  54. Hey is this really for lenovo s850? coz the stockrom your uploaded destroyed my phone permanently now i cant flash it anymore after trying your method

    ReplyDelete
    Replies
    1. Do you read other comments? And do you read the dislaimer? Do it at your oulwn risk. Your answer can be found at comments section

      Delete
  55. dear bro.. mr. andy suwito
    i have already done the procedure as per your instruction.but no luck still showing no service..what shall i do.. anything else to do?? plz help me

    ReplyDelete
    Replies
    1. On step 3 pick emmc rather that nand flash

      Delete
  56. I need to download nvram file for lenovo S850, but not able to do it. Pls help

    ReplyDelete
    Replies
    1. change your DNS to google DNS, all my link redirect to adfly and bitly so if your country block it try changing your DNS

      Delete
  57. Thanks Man its rely good post!!!!!!!!!

    ReplyDelete
    Replies
    1. Your welcome, thank you for visit and leave comment

      Delete
  58. thanks a lot... its done to me.. i follow all the step and now i can make a call. thanks a lot!!!

    ReplyDelete
  59. thanks a lot!! its done.. signal back again.. thanks a lotttt!!!!

    ReplyDelete